or
3 answers
75 views
I know this question has been asked and answered, but either I'm not understanding how to address my specific situation, or I am asking for something slightly different.
I have a scripted test that looks for specific text on screen, and if it does find that text, the test will Log.WriteLine and continue on with the test. What I would also like to happen, is for the test to be marked with a rex X as a fail, but still continue on with the test.
If I could please get some assistance, that would be great.
I have a scripted test that looks for specific text on screen, and if it does find that text, the test will Log.WriteLine and continue on with the test. What I would also like to happen, is for the test to be marked with a rex X as a fail, but still continue on with the test.
If I could please get some assistance, that would be great.
foreach (HtmlAnchor Reports in creativeReportsAnchors){ try { Log.WriteLine(Reports.HRef); Reports.Click(); //Refresh DOM tree System.Threading.Thread.Sleep(7000); ActiveBrowser.RefreshDomTree(); if (ActiveBrowser.ContainsText(productionError) == true) { Log.WriteLine("ERROR: "); } else if (ActiveBrowser.ContainsText(stagingError) == true) { Log.WriteLine("ERROR: "); } System.Threading.Thread.Sleep(2000); } catch (Exception) { } finally { ActiveBrowser.NavigateTo(CurrentSiteUrl + "reports-creative.aspx"); }}
Cody
Telerik team
answered
on
25 Sep 2014
5 answers
136 views
My company is a .net shop and our data is very Dynamic. Each time we access a form on a web page, that page creates what we call a “Recid”. When I record an automated test and then re-run that test, I get an error saying “element was not found”. I am guessing this is because the page now has a Recid different than the one when I first recorded the test. How can I get around this? I need the automated test to except whatever the newest Recid will be.
Example.
When I recorded an automated test, the Recid=15266 (see below). The next time I access the same web-page, this Recid will equal 15227 (or even higher number)
https:/ser/Crf/Enter.aspx?Id=R01-0028BB&RecId=15226
I am testing out Test Studio trial to see if this is a product my company may want to purchase. However, the above issue would be a show stopper for us.
Also, is there a way to ignore pop ups when recording UI recorded tests?
Example.
When I recorded an automated test, the Recid=15266 (see below). The next time I access the same web-page, this Recid will equal 15227 (or even higher number)
https:/ser/Crf/Enter.aspx?Id=R01-0028BB&RecId=15226
I am testing out Test Studio trial to see if this is a product my company may want to purchase. However, the above issue would be a show stopper for us.
Also, is there a way to ignore pop ups when recording UI recorded tests?
Cody
Telerik team
answered
on
25 Sep 2014
2 answers
78 views
Hello,
My version is 2012.2.1317.0.
My question is simple. Is it possible to call a test as a substep in a test? i.e. I have several automated tests that need to have the same workflow executed in them. I write that workflow as a test called 'basic workflow test'. I create a new test. In that new test is it possible to call the 'basic workflow test' as a step? This would save me time and reduce maintenance.
If I have posted this question in the wrong section and it should be put in the forums, please let me know.
My version is 2012.2.1317.0.
My question is simple. Is it possible to call a test as a substep in a test? i.e. I have several automated tests that need to have the same workflow executed in them. I write that workflow as a test called 'basic workflow test'. I create a new test. In that new test is it possible to call the 'basic workflow test' as a step? This would save me time and reduce maintenance.
If I have posted this question in the wrong section and it should be put in the forums, please let me know.
mousumi
Top achievements
Rank 1
Rank 1
answered
on
24 Sep 2014
3 answers
95 views
I have a telerik licensed tool. full version. I was searching for keyword driven framework online but couldnt find any document.
Can you please help me understand if Telerik supports keyword driven approach.
If so please send me the appropriate link. Thanks.
Can you please help me understand if Telerik supports keyword driven approach.
If so please send me the appropriate link. Thanks.
Cody
Telerik team
answered
on
23 Sep 2014
16 answers
112 views
Hi!
In our webapplication we have a jquery search field in which letters are entered, and a list of peoples names are listed that contains the letters entered. I.e. if I enter "w" a list of people having "w" within one of their names are listed.
The list is not appearing when I replay the test, though. I have read the documentation on jquery controllers both on Teleriks help pages, and in this forum, but it is not helping me out.
This is the method that should "trigger" the list:
Actions.SetText(Pages.BestillAvbestillRollerFor0.TxtSokSearch, "w")
Does anyone have any suggestions on how to make it work?
In our webapplication we have a jquery search field in which letters are entered, and a list of peoples names are listed that contains the letters entered. I.e. if I enter "w" a list of people having "w" within one of their names are listed.
The list is not appearing when I replay the test, though. I have read the documentation on jquery controllers both on Teleriks help pages, and in this forum, but it is not helping me out.
This is the method that should "trigger" the list:
Actions.SetText(Pages.BestillAvbestillRollerFor0.TxtSokSearch, "w")
Does anyone have any suggestions on how to make it work?
Boyan Boev
Telerik team
answered
on
23 Sep 2014
2 answers
103 views
Hello -
Question: Is there a recommended approach to testing values returned in an SSRS report?
Context: I have just started evaluating Test Studio for use with my company's client extranet. The site makes heavy use of SQL Server 2012 SSRS reports. I want to be able to run a report and validate the results that come back by spot checking key values returned in the report table. These tables are often thousands (if not tens of thousands) of rows long by dozens of columns wide. Consequently, I can't create reliable ID's for each data point.
When I run the Test Studio recorder, select a few cells in the SSRS results, then run the test, I typically get errors indicating that Test Studio was "Unable to locate element." Furthermore, it says that it was found by backup search using the xpath value. I can resolve the failure by going to the "Resolve Failure" tab, removing the existing filters, and replacing them with the xpath suggestion. From there, the test will work.
The down side is that this seems fairly fragile in nature. The xpath for most data points looks something like this:
xpath=/html[1]/body[1]/form[1]/div[5]/div[1]/div[1]/div[1]/div[4]/div[1]/div[3]/div[2]/table[1]/tr[2]/td[1]/div[1]/div[1]/div[3]/div[1]/div[1]/div[1]/div[1]/table[1]/tbody[1]/tr[1]/td[1]/div[1]/div[1]/table[1]/tbody[1]/tr[2]/td[1]/div[1]/table[1]/tbody[1]/tr[1]/td[4]/table[1]/tbody[1]/tr[1]/td[1]/div[1]/span[1]/div[1]/table[1]/tbody[1]/tr[5]/td[3]/div[1]/div[1]/div[1]/table[1]/tbody[1]/tr[1]/td[1]/div[1]/table[1]/tbody[1]/tr[52]/td[6]/div[1]
To say that's ugly is an understatement, and it seems like it wouldn't take much of a page update to throw it off. Plus, because I need to add many data point validations, I really don't want to go into Test Studio, create all the tests, and then run each one over and over until I resolve all the failures by following the steps above.
Restating the Question: Is there a recommended approach to testing values returned in an SSRS report?
Thank you in advance for any direction you can provide!
Best regards,
Jason W. Pegg
Question: Is there a recommended approach to testing values returned in an SSRS report?
Context: I have just started evaluating Test Studio for use with my company's client extranet. The site makes heavy use of SQL Server 2012 SSRS reports. I want to be able to run a report and validate the results that come back by spot checking key values returned in the report table. These tables are often thousands (if not tens of thousands) of rows long by dozens of columns wide. Consequently, I can't create reliable ID's for each data point.
When I run the Test Studio recorder, select a few cells in the SSRS results, then run the test, I typically get errors indicating that Test Studio was "Unable to locate element." Furthermore, it says that it was found by backup search using the xpath value. I can resolve the failure by going to the "Resolve Failure" tab, removing the existing filters, and replacing them with the xpath suggestion. From there, the test will work.
The down side is that this seems fairly fragile in nature. The xpath for most data points looks something like this:
xpath=/html[1]/body[1]/form[1]/div[5]/div[1]/div[1]/div[1]/div[4]/div[1]/div[3]/div[2]/table[1]/tr[2]/td[1]/div[1]/div[1]/div[3]/div[1]/div[1]/div[1]/div[1]/table[1]/tbody[1]/tr[1]/td[1]/div[1]/div[1]/table[1]/tbody[1]/tr[2]/td[1]/div[1]/table[1]/tbody[1]/tr[1]/td[4]/table[1]/tbody[1]/tr[1]/td[1]/div[1]/span[1]/div[1]/table[1]/tbody[1]/tr[5]/td[3]/div[1]/div[1]/div[1]/table[1]/tbody[1]/tr[1]/td[1]/div[1]/table[1]/tbody[1]/tr[52]/td[6]/div[1]
To say that's ugly is an understatement, and it seems like it wouldn't take much of a page update to throw it off. Plus, because I need to add many data point validations, I really don't want to go into Test Studio, create all the tests, and then run each one over and over until I resolve all the failures by following the steps above.
Restating the Question: Is there a recommended approach to testing values returned in an SSRS report?
Thank you in advance for any direction you can provide!
Best regards,
Jason W. Pegg
Cody
Telerik team
answered
on
22 Sep 2014
6 answers
187 views
How can i get snapshots of the web application during the test execution?
Boyan Boev
Telerik team
answered
on
19 Sep 2014
5 answers
36 views
HI,
did anyone used new internal build , which claims that the test list issue is resolved . I tried using the new internal build, but still not able to execute more than 4 test cases in a list.
our project is of size 700 mb and i cannot share the project due to confidentiality.
Pls let us know if any other way to resolve the issue that i am facing ? This has been show stopper for us and the entire team is spending 10X more time in running each tests .
Pls help !!
did anyone used new internal build , which claims that the test list issue is resolved . I tried using the new internal build, but still not able to execute more than 4 test cases in a list.
our project is of size 700 mb and i cannot share the project due to confidentiality.
Pls let us know if any other way to resolve the issue that i am facing ? This has been show stopper for us and the entire team is spending 10X more time in running each tests .
Pls help !!
Boyan Boev
Telerik team
answered
on
19 Sep 2014
3 answers
81 views
Hi,
I need to do API Load testing for our mobile App. Any suggestion how can I approach to it using Test Studio.
Thanks
Smit
I need to do API Load testing for our mobile App. Any suggestion how can I approach to it using Test Studio.
Thanks
Smit
Boyan Boev
Telerik team
answered
on
19 Sep 2014
3 answers
81 views
Hi,
We would like to ask you for support for Telerik Test Studio and Microsoft Team Foundation Server integration.
We have noticed that if we keep our project syncronized with TFS, Test Studio is extremely slow when loading and, from time to time, it closes unexpectedly.
Because of this, we keep Test Studio unsyncronized with TFS, which has reduced the sudden crashes, , but is also impractical and untenable as we want to
track the project changes properly in TFS.
Is this a known issue? Can you help with a workaround for the problem? If this is covered in another thread, I'd appreciate a pointer in the right direction.
Thank you in advance,
Best regards,
Jakob
We would like to ask you for support for Telerik Test Studio and Microsoft Team Foundation Server integration.
We have noticed that if we keep our project syncronized with TFS, Test Studio is extremely slow when loading and, from time to time, it closes unexpectedly.
Because of this, we keep Test Studio unsyncronized with TFS, which has reduced the sudden crashes, , but is also impractical and untenable as we want to
track the project changes properly in TFS.
Is this a known issue? Can you help with a workaround for the problem? If this is covered in another thread, I'd appreciate a pointer in the right direction.
Thank you in advance,
Best regards,
Jakob
Boyan Boev
Telerik team
answered
on
18 Sep 2014
