Dear Telerik Test Studio Team,

We use Silverlight and so we can't access the windows printer dialog which opens, to select an PDF printer.
Do you have any suggestions?

Regards

Gina 

I was writing to inquire if there is an outstanding bug with the User Session Configuration - Change console resolution setting. I noticed this was posted in the feedback portal, but I hadn't found an update to this post: https://feedback.telerik.com/teststudio/1457711-change-console-resolution-option-is-not-working

I currently have a remote server that we remote into to run our test and schedule test runs. I noticed that when I disconnect and a schedule test list run is ran some of my test fail and looking at the graphic of the failure it looks like the screen resolution might have been reduced. (see attached). I have set the 'user session configuration' settings set as follows: keep machine awake - on; reconnect to console on disconnect - on; and change console resolution to 1920x1080 - on 

When I am connected to the server through remote desktop and the test run the list doesn't have any failures and the web app doesn't looked condensed to smaller resolution. It's when I disconnect that I notice is it gives the errors and possibly changes. I did verify that our server is not connected to a physical monitor, so I am unsure what would cause the resolution to change. 

Thanks in Advanced 

Hi,

we have a grid where a column is set to selectable. Recording the select event and then playing that back does not always work. The checkbox has no id or other identifying property which would make it easy for test studio to find seeing how it is on every row...

Any suggestions?

Matt

Hello,

I'm trying to run a test list on a Execution + Scheduling server but receiving an error during the upload process "Running test failed internally due to unhandled error"  .

My telerik version is 2015.3.1217.0 on both machines.

A couple of things that I tried without success:

- Move the project files to a different location

- Try running a test list from a new project

- Restart the scheduling server

- Tried to put the project under source control but I couldn't due to a different error (created another forum thread for that: http://www.telerik.com/forums/error-203-when-connecting-to-tfs)

This is the log file on the remote machine:

[01/13 06:49:37,Telerik.TestStudio.ExecutionManagerService.exe(1884:22)] First trace message from pool unnamed thread (managed ID = 22, native ID = 4956).
[01/13 06:49:37,Telerik.TestStudio.ExecutionManagerService.exe(1884:22),Execution] JobBroker.ScheduleJobAsync() : Job satisfied all preconditions, id = 30821eb4-66e8-4921-8258-4b6279eb330e
[01/13 06:49:42,Telerik.TestStudio.ExecutionManagerService.exe(1884:26)] First trace message from pool unnamed thread (managed ID = 26, native ID = 3652).
[01/13 06:49:42,Telerik.TestStudio.ExecutionManagerService.exe(1884:26),Execution] JobRunner.RunJobAsync() : Unable to load test list, aborting run.
[01/13 06:49:42,Telerik.TestStudio.ExecutionManagerService.exe(1884:26),Execution] JobRunner.RunJobAsync() : Use source control server: NO
[01/13 06:49:42,Telerik.TestStudio.ExecutionManagerService.exe(1884:26),Execution] JobRunner.RunJobAsync() : Project source location: C:\Anova\TestStudio\Jazz
[01/13 06:49:42,Telerik.TestStudio.ExecutionManagerService.exe(1884:26),Execution] JobRunner.RunJobAsync() : Check if test list is available at project location. Consider cleaning Job storage!
[01/13 06:49:42,Telerik.TestStudio.ExecutionManagerService.exe(1884:26),Execution] JobRunner.RunJobAsync() : Job storage location: C:\Windows\system32\config\systemprofile\AppData\Roaming\Telerik\TestStudio\Scheduler\ScheduleStorage
[01/13 06:49:42,Telerik.TestStudio.ExecutionManagerService.exe(1884:26),Execution] JobsController.CreateNewJob() : Unable to create a new job.

I'm not sure if it has something to do or not, but the "Job storage location" on the remote machine is located on SysWOW64 and not on System32

This is the log file on my client machine

[01/13 10:54:55,Telerik.TestStudio.Desktop.exe(2104:1),Execution] RemoteExecutionViewModel.SendRun() : EXCEPTION! (see below)
Situation: Running test list failed internally due to unhandled error!
Outer Exception Type: System.Net.Http.HttpRequestException
Message: Response status code does not indicate success: 500 (Internal Server Error).
HRESULT: 0x80131500 (Official ID (if app.) = COR_E_EXCEPTION, Error Bit = FAILED, Facility = FACILITY_URT, Code = 5376)
Call Stack:
at System.Net.Http.HttpResponseMessage.EnsureSuccessStatusCode()
at Telerik.TestStudio.Shared.Communication.BaseCommunicationLayer.<HandleResponse>d__5f.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.ValidateEnd(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.GetResult()
at Telerik.TestStudio.Shared.Communication.BaseCommunicationLayer.<HandleResponse>d__62`1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.ValidateEnd(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Telerik.TestStudio.Shared.Communication.BaseCommunicationLayer.<Post>d__46`2.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.ValidateEnd(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Telerik.TestStudio.Shared.Communication.ExecutionManagerCommunicationLayer.<QueueJobRun>d__29.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.ValidateEnd(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at ArtOfTest.WebAii.Design.UI.ViewModels.RemoteExecutionViewModel.<SendRun>d__1d.MoveNext()

Hi, 

Let's consider I have a test named "test_A" (in a list "list_A") bound to data source.

The test contains some coded steps and data source schema is in the attached file.

Is it possible using coded step to alter/edit Data source values? For example, let's say I want to set "SkipTest" value for second iteration to "1" in a coded step according to a custom strong verification.

I am asking this because I want to have that value present in the result file ".aiiresult" as the corresponding iteration data when executiong "list_A" as it is faked (by me) in Result attached file.

1. What is the existing user-base (customer) size of Telerik Studio ? 

2. Can you explain more on the Architecture followed for this tool.

3. Speed & performance features of this tool ?

Good morning,

fFor test development i add tests for e.g. login and calling of the needed mask...then i deactivating these for further changes on this test.
This saves much time when i have to edit one of the tests - i set only two or three checkboxes and say "run to here" to continue editing or doing the change i need.

Now i testes a whole mask by adding the standard tests for login, logout and so on.
Test for adding fails, because this test hiere is calling all the deactivated steps.  But for what reason we have checkboxes for active-state of the test steps when these are overriden by test list execution?  This makes no sense for me.

As you can see in the screenshots step 6 is deactivated - but executed by test list.

I have several tests where i deactivated bigger IF-brunches for future testing. These will be executed by test list too, when i undestand this execution result.

Greetings
Paul

Is there an option where i can acivate the debugger in "run from here" option?

I'm creating a test for an bigger dialog and have to correct/change some of the controls which were not found. After this i start from this point (Browser + Recorder still open) to test this step.  And i know then some steps later there is the next error in the test - but the Test Runner never stops on errors.

Debugger is on and i've set to halt on any error.  When using "Run from here" the Test Runner looks like in the added screenshot.

Hi,

i've a problem with typing in of IP adresses while using CSV / data driven testing.

The first tiny "bug" is, that the setting "ClearCurrentText" almost never clears the complete field. This is in this case a big problem, because the IP has a specified length and cannot by typed in at full length.  The auto-clear removes only several chars of the text. In the case of the IP address 5...7 chars remains.
This makes it necessery for some textboxes to add additional steps to crear the boxes manually.

The main problem:   the dot's in the IP address are not typed in.  I've tried severel settings - but nothing changes.

Used value - 1:1 copy of the address from my CSV file:   192.168.61.155

Typed in text in silverlight app in internet explorer:           19216861155   (see screenshots)

I've tried then several other chars behind the address and found one which makes this working:   when "=" iss added somewhere in the string the dots are correctly entered. The equal sign itself is NOT typed in by test  studio.  The position in the string does not matter - it can also stand in the middle of the IP address.

Actually i have to type in IP addresses in CSV this way to have it working:          ....,192.168.61.157=,....    (see screenshots)

Best regards

Hi , 

I need to execute the steps in my project based on the appearance of the Alert box.

My secnario : 

If the Alert box appears, then I have to do some pair of  steps ( ex: 1,2,3 )

If the Alert box doesn't appear, I want to do nothing, and continue my other steps. (ex 5,6,7)

I am not sure, how to do handle this ?  Is it possible to detect and check if the alert box appears on the screen or not ?

could you please help.

Regards,

Nithya A.