Hi,

I want to test performance of my web application, for this I did following:

• Created a small web test
• Designed a load test
• Environment setup
• Define user profiles, balance workload & adjust test settings

Controller and agents got enable and turned their buttons into green but reporter didn’t most of the time. Reporter remains into red even I started service from “Configure Load Test Services” but still “Run this test” button is disabled and having message “cannot run because reporter cannot establish its databases”.

 

I m facing above problem most of the time but if reporter turns into green I could not analyze results. I cannot see any results in “Analyze your results” window.

 

I m facing one more issue that when I attempted to stop the service and restart it, I m getting “Unable to save configuration file. Be sure you have permissions to save the file” error on clicking “Apply” or “Ok” buttons.

 

Kindly guide me in above scenarios.

Thanks in advance

• I want to test performance of my web application, for this I did following:

  •   Created a small web test

  •   Designed a load test (1. Environment setup and  2. Define user profiles, balance workload & adjust test settings)

  Controller and agents got enable and turned their buttons into green but reporter didn’t most of the time. Reporter remains into red even I started service from “Configure Load Test Services” but still “Run this test” button is disabled and having message “cannot run because reporter cannot establish its databases”.

    

  I m facing above problem most of the time but if reporter turns into green I could not analyze results. I cannot see any results in “Analyze your results” window.

    

  I m facing one more issue that when I attempted to stop the service and restart it, I m getting “Unable to save configuration file. Be sure you have permissions to save the file” error on clicking “Apply” or “Ok” buttons.

    

  Kindly guide me in above scenarios.

  Thanks in advance 

I have this code written as a Script Step.
I am extracting the value "BC_PolEffectiveDate" from a web application and comparing it to a value "EffectiveDate" in the database.

 

 

I can see from the log when these two values do not match but when i run the script on a schedule, Test Studio returns just a pass or fail info and the test passes either by going into the IF or ELSE condition. I need to fail the test when the script goes into the ELSE condition. How can i handle that? Is there a custom code that i can use to change the status of the test when i encounter certain conditions?

 

I have Test Studio standalone trial 2012.1.411.0 installed on my desktop (Windows 7) and it also installed the VS plugin, and can record and execute tests across all 4 supported browsers.

However, I installed the same version on Windows Server 2008 (without the VS plugin) and cannot get Chrome to execute any tests, it just hangs with "Preparing browser for automation..."

I've checked that the Chrome Extension is installed and it is Enabled and I've configured the browser.
When I checked for the registry entry at the bottom of this page, it wasn't there:
http://www.telerik.com/automated-testing-tools/support/documentation/user-guide/troubleshooting_guide/test-execution-problems/chrome/cannot-execute-in-chrome.aspx

I imported the reg entry and rebooted the server but Chrome will still not execute a simple test.

Is there anything else I can try?

Thanks,
Steve

Hi - I am currently evaluating WebUI QA edition. I am able to record tests, but I am unable to get achieve playback. I receive the following error:

'3/1/2011 10:46:47 PM' - Error launching the runner. Error: System.TimeoutException: The operation has timed out.  
    at System.IO.Pipes.NamedPipeClientStream.Connect(Int32 timeout)  
    at ArtOfTest.WebAii.Design.Execution.RunnerController.Launch(Int32 waitForReadyTimeout, String pathToRunner, Int32& runnerProcId)

I have referenced another thread regarding this same error, but the steps outlined in that thread did not help the problem.
 (Changed "Network access: Restrict anonymous access to Named Pipes and Shares" from Enabled to Disabled - did not work)
 
I have WebUI installed on a VM running Windows Server 2003 R2 with Internet Explorer 8. 

I appreciate any help you can provide - this is a frustrating roadblock since I cannot proceed with testing until it is alleviated.

Thanks again.

Hi,
   telerik team

  When I verified  a cell's value in a datagrid  with pagination, I failed to get all the pages row count but only the current page.
  It seems the 'grid.Rows.Count' just get the current page row count, 5 here.
  And I want to get all the 7 pages row count, how can I to realize this? Reminder, the records on the last page,Page 7, may be less than 5.
  And the values I verified ('test for comment26') is indeed on the 1st page, even though, it failed.

  Attachment the screenshot and my coded step fails below, and hope they help.

  Thanks in advance and have a nice weekend.

//Get the data grid.
SilverlightApp app = ActiveBrowser.SilverlightApps()[0];
DataGrid grid = app.Find.ByAutomationId<DataGrid>("RelatedCommentsDataGrid");
 
int r = grid.Rows.Count;

List<string> list = new List<string>();
 
//Place the TextBlock content of the comment subject cell from each row into the string list.

for (int i = 0; i < r; i++)
{
   DataGridRow row = grid.Rows[i];
   DataGridCell cell = row.Cells[2];   
   list.Add(cell.TextBlockContent);
   Log.WriteLine(cell.TextBlockContent);
}

//Get the created comment subject
object createdComment = GetExtractedValue("CommentSubject");

//Compare the created comment subject to the list and determine if it created successfully.
for (int j = 0; j < list.Count; j++)
{
   if (j+1 == list.Count)
   {
      break;
   }
    else
   {
    if (createdComment.Equals(list[j])){
        Log.WriteLine(createdComment+"is created successfully");
    }
    else{
        Log.WriteLine(createdComment+"fails to created" );
    }

  }
}

 

Hello,

I've read in the following blog post that you support recording on Firefox 2+, IE 7+, Safari 5+, Chrome 7+ 
http://blogs.globallogic.com/net-web-test-automation-selenium-vs-telerik%E2%80%99s-test-studio 

I am working with the trial version for now,
and I can only record from IE. why?

How can I change it?

Thanks,
Yohai

I have an calendar web app that gives the user an RSS page / XML page of today's events. I want to verify that data, but I'm not sure how to get the XML page as as element to read the data.

Here is an example of the XML page:

 Hi,

 I tried record & playback for a "Create" screen. All the step runs fine but at the last when the "Save" button is clicked after the data is entered, the page is been redirected to error page. Initially i thought there might be some problem with the network. So i tried to create a new contact manually & it got saved without any error. I used the same test data which i have given in the "Test" in the test studio. I'm not pretty much sure about the issue. Kindly help me in resolving this issue.

Thanks,
Deepa.C

Hi Telerik Team,

I am getting below error while inserting text textbox in FF but same code is working fine with IE.

Target '[Element: 'iframe:0'' is not a supported element to set text to. at ArtOfTest.WebAii.Core.Actions.SetText(Element targetElement, String text) at ArtOfTest.WebAii.Design.IntrinsicTranslators.Descriptors.SetTextActionDescriptor.Execute(Browser browser) at ArtOfTest.WebAii.Design.Extensibility.HtmlActionDescriptor.Execute(IAutomationHost autoHost) at ArtOfTest.WebAii.Design.Execution.ExecutionEngine.ExecuteStep(Int32 order)

What could be the reason?

Hi,

How can we send from local database (for testing data) a value to our bind t-sql param?

sample:

If this is my local db: (column name is TempMachineName)
Machine1
Machine2

select Id from [ActiveMachines] where Name = '$(TempMachineName)'

and then to use the scalar value for some locator on DOM element

Thanks,
Yohai