EKG signal using RadChartView

        Random rnd = new Random();
        FastLineSeries series = new FastLineSeries();
        Dictionary<string, double?> categoryValuePairs = new Dictionary<string, double?>();
        public RadForm1()
        {
            InitializeComponent();                  
            
            for (int i = 0; i < 100; i++)
            {
                CategoricalDataPoint point = new CategoricalDataPoint(rnd.Next(50, 100), i);
                series.DataPoints.Add(point); 
                categoryValuePairs.Add(i.ToString(),point.Value);
            }
            radChartView1.Series.Add(series);
            CategoricalAxis categoricalAxis = series.HorizontalAxis as CategoricalAxis; 
            categoricalAxis.LabelFitMode = AxisLabelFitMode.Rotate;
            this.timer1.Interval = 100;
        }

        private void radButton1_Click(object sender, EventArgs e)
        {
            if (!this.timer1.Enabled)
            {
                this.timer1.Start();
            }
            else
            { 
                this.timer1.Stop();
            }
        }

        int cnt = 0;

        private void timer1_Tick(object sender, EventArgs e)
        {
            cnt++;
            if (cnt >= series.DataPoints.Count - 5)
            {
                cnt = 0;
            }
            CategoricalDataPoint point = null;
            for (int i = 0; i < series.DataPoints.Count; i++)
            {
                point = (CategoricalDataPoint)series.DataPoints[i];
                if (i >= cnt && i < cnt + 5)
                {
                    point.Value = null;
                }
                else
                {
                    point.Value = categoryValuePairs[point.Category.ToString()];
                }
            }
        }

Regards,
Dess | Tech Support Engineer, Sr.
Progress Telerik

Dear Dess,

Thanks for your feedback and sample project. Appreciated.

A User Control was implemented based on your project a some minors changes. 

Three (3) testing scenarios were performed as described below:

• 100 points adding one (1) value/sample with a timer from the Main Form @10ms.
• 1000 points adding one (1) value/sample with a timer from the Main Form @10ms.
• 10000 points adding 100 value/sample with a timer from the Main Form @1ms. I also adjusted the ramp increment/decrement value.

Attached some videos (gif) of the testing as well.

Our goal is to have real time chart that could manage to add from 1 to 100 new points at the same time, and keep in the screen 10.000 points. Considering this request, may you suggest an approach to improve the performance?

Thanks for your attention

Hu

Hello, Hu, 

The provided gif files are greatly appreciated. 

To be honest, 10 000 data points are quite much for RadChartView. It is not even possible to see so many points at the screen simultaneously. It is expected to affect the performance when it has to draw so many points. 

In order to improve performance, you can perform some grouping operation in your data before attaching it to RadChartView. Another solution is to aggregate the data - that is, reduce it to a smaller number of points by 'combining' values by taking their averages.

For example you can have 50,000 points. If you average every 10 values, the number of points is reduced to 5000. That is still too many, so you could average, say, in blocks of 100 or even 250. Alternatively, aggregate a previous aggregate - with, say, 10 values in each takes you down from 50,000 to 5000 to 500. Thus, RadChartView will manage fewer data and it will be fast enough.

If you refer to our Demo application >> ChartView >> Live Data example, you will notice that the chart uses a fixed number of data points. Each second the first data point is removed and a new one is added. Thus, the chart will be "light" enough for rendering.

Should you have further questions please let me know.

Regards,
Dess | Tech Support Engineer, Sr.
Progress Telerik

Dear Dess,

Thanks again for your feedback. 

I was able decrease the quantity of the points (for now) and remove samples as you suggested at the end of your message. 

Regards