hello
I have multiple cameras attached to the system and at the time , I wanted to display result of 3 cameras in small screen and 1 from these cameras in a big picture box. But When I select one of the came and take snapshots and display the result in picture box, the video start displaying in a picture box but the selected camera starts blinking. In case, if you didn't understand my problem I have attached a video and a code.
Please guide me how I can display the selected camera video feed in a picture box and it should not blink.
1 Answer, 1 is accepted
Hi Haithem,
It seems that the video and the code fail to attach. Can you resend them again so that I have a better look and the set-up of the cameras? Generally speaking, we are not aware of such behavior using our RadWebCam control so a video and a sample project will be of great help narrow down the reason behind this.
Regards,
Dinko
Progress Telerik
Coming to you live from Progress360 in-person or on your own time, DevReach for all. Register Today.
Rank 1
thank you for your support
this my code and video example showing what i want
i want to display image from radwebcam to picturebox or another radwabcam
The provided sample project is greatly appreciated. However, it seems different compared to the one shown in the video.
I have reviewed the code and I can suggest you after initializing a RadWebCam and starting it, to subscribe to the RadWebCam.SnapshotTaken event. In the SnapshotTakenEventArgs you have access to the Snapshot image which can be directly assigned to the PictureBox.Image property.
private void simpleButton6_Click(object sender, EventArgs e)
{
videoFormats = RadWebCam.GetVideoFormats(this.comboBox1.SelectedItem as MediaFoundationDeviceInfo, true);
this.radWebCam1.Initialize(this.comboBox3.SelectedItem as MediaFoundationDeviceInfo, videoFormats[0]);
this.radWebCam1.Start();
this.radWebCam1.SnapshotTaken += RadWebCam1_SnapshotTaken;
}
private void RadWebCam1_SnapshotTaken(object sender, SnapshotTakenEventArgs e)
{
this.pictureBox1.Image = e.Snapshot;
}
Rank 1
Thanks for the reply, but I don't want to show the picture. I want to show the video directly in picturebox at same time
The attached video is an example of what I want to do
Hi, Haithem,
Please have in mind that PictureBox is a control designed to show an Image, not a video. The possible solution that I can suggest is to use a timer on which Tick event you can force taking a snapshot from the camera and assign the produced image to the PictureBox.
Rank 1
thank you
can i use another RadWebCam to display video at same time
Hi, Haithem,
One camera device can be attached only to a single RadWebCam control. You will notice that if one application is already using the camera device, the RadWebCam control can't preview the video and vice versa.