Hi, I have a number of type-ahead fields within the application I am testing and test studio struggles with these. I am entering a value and using keypress "Tab" which should poulate a grid below. When doing this maually it works, however, the tab keypress step doesnt operate as it should if pressed manually.
Any advice?

I have a table in an update panel and i each column can be sorted by clicking on an href in the column header (asc and desc)

I use recorded clicks on the header of 7 columns and then check by code the  right order of the content

very often, but not always, the click event hangs (also ajaxtimeout is set to 1500 or higher

the logged error is 

'25.04.2013 11:21:24' - 'Fail' : 13. 2_23_Click 'ProductOverviewProductGridDerivativeWKNToggleLink_DESC'
------------------------------------------------------------
Failure Information: 
~~~~~~~~~~~~~~~
Wait for condition has timed out
InnerException:
System.TimeoutException: Wait for condition has timed out
   at ArtOfTest.Common.WaitSync.CheckResult(WaitSync wait, String extraExceptionInfo, Object target)
   at ArtOfTest.Common.WaitSync.For[T](Predicate`1 predicate, T target, Boolean invertCondition, Int32 timeout, WaitResultType errorResultType)
   at ArtOfTest.Common.WaitSync.For[T](Predicate`1 predicate, T target, Boolean invertCondition, Int32 timeout)
   at ArtOfTest.WebAii.Core.Browser.WaitUntilReady()
   at ArtOfTest.WebAii.Core.Browser.ExecuteCommand(BrowserCommand request, Boolean performDomRefresh, Boolean waitUntilReady)
   at ArtOfTest.WebAii.Core.Browser.ExecuteCommand(BrowserCommand request)
   at ArtOfTest.WebAii.Core.Actions.Click(Element targetElement)
   at ArtOfTest.WebAii.Controls.HtmlControls.HtmlControl.Click()
   at ArtOfTest.WebAii.Controls.HtmlControls.HtmlControl.Click(Boolean isClosing)
   at ArtOfTest.WebAii.Design.IntrinsicTranslators.Descriptors.ClickActionDescriptor.Execute(Browser browser)
   at ArtOfTest.WebAii.Design.Extensibility.HtmlActionDescriptor.Execute(IAutomationHost autoHost)
   at ArtOfTest.WebAii.Design.Execution.ExecutionEngine.ExecuteStep(Int32 order)

this doesnt work:

table.AssertTable().RowRange(ArtOfTest.WebAii.Controls.HtmlControls.HtmlAsserts.NumberRangeCompareType.OutsideRange, 1, 2);

I do not find the Enum NumberRangeCompareType, because it is  in the Workspace

ArtOfTest.Common.NumberRangeCompareType.InRange 

That is not very helpful.

A very frustrated Michael

Hi there,

I am checking for element in the screen not exist, I used "Wait element not exist", the element in the screen was exist, I expect this test should fail, but the check is pass, but when I add Execution Delay "Wait for '500' " before the checking, the test for element not exist is fail as expected. My questions are, how I know I need to add exection delay? and do I used the wright command for checking on element does not exist?   

Your help and support is much appreciated

Talal

I am using Telerik.Testing.Framework.2012.2.1527
I am using the below code. I am getting null for "findElem" all the time. but when I am in debug mode it is fine. WaitUntilReady(); is not working as expected for me. In my scenario I should not be using waitforelement and specify timeout.


If I set the Execution Delay to >500, my tests are running fine. But if I give it 0 they fail to find elements.
Manager.Settings.ExecutionDelay = 500;
Can you let m know what I am missing here?

I Have in C# Script:

            try
            {
                ActiveBrowser.WaitForElement(Pages.Deuba_Relaunch_FR_Navigation.Expressions.Productoverview_Article, 3000, false);        
            }
            catch
            {
                Log.WriteLine( "Productoverview Div Article not found");
                return false;
            }

That works, but here i dont want the Failure Information because I have the Log-Information
Thanks for Help

I am using a procedure which is checking the controls of an dynamic loades page.
The page is loaded via a menu links with different product parameters.
The link is clicked as an step, then the procedure is called in an following step.

Sometimes I get this error:
------------------------------------------------------------
'22.04.2013 16:45:27' - Error encountered during execution.
------------------------------------------------------------
'22.04.2013 16:45:27' - Error attempting to exit runner. Error: System.IO.IOException: Pipe is broken.
   at System.IO.Pipes.PipeStream.WinIOError(Int32 errorCode)
   at System.IO.Pipes.PipeStream.WriteCore(Byte[] buffer, Int32 offset, Int32 count)
   at System.IO.Pipes.PipeStream.Write(Byte[] buffer, Int32 offset, Int32 count)
   at ArtOfTest.WebAii.Design.Execution.RunnerController.Exit()
------------------------------------------------------------
'22.04.2013 16:45:27' - Aborting....


Hmm, getting more and more frustrated

I check the selected Text of an Dropdown element (step before: check if exists with success)
after the second run, i get this error
'23.04.2013 12:35:14' - 'Fail' : 32. 2_17_Verify selection 'ByText' is 'Tous' on 'ProductOverview_Filter_DerivativeType_Select'
------------------------------------------------------------
Failure Information: 
~~~~~~~~~~~~~~~
Object reference not set to an instance of an object.
InnerException:
System.NullReferenceException: Object reference not set to an instance of an object.
   at ArtOfTest.WebAii.Design.IntrinsicTranslators.Descriptors.SelectVerificationDescriptor.ExtractData(IAutomationHost targetBrowser, DescriptorValueStore dataStore)
   at ArtOfTest.WebAii.Design.Execution.ExecutionEngine.ExecuteStep(Int32 order) 

I selected this element for mthe element list, selected from the suggrestion list the Verification Select 'byText' and modified the wanted text in the Inline Editor

What is the problem,how can i solve it ask a now VERY frustrateD Michael

Hi,

I have following scenario:

1. Open Mail
2. Copy URL from mail (Link is disabled in mail so can't click to open)
3. Paste in in new browser and work

I am able to extract the url but passing it new browser is sometime failing due to characters like %3d. I am using following code:

1. Extracted variable : StagingLink
2. Link=GetExtractedValue("StagingLink");

 3.        Manager.LaunchNewBrowser(BrowserType.InternetExplorer, true);
            Browser ie = Manager.ActiveBrowser;
            ie.NavigateTo((string)ViewMail.Link,true);

Here part of URL where "%3d" is present is changed to "="  during string conversion so not working. Please help

Hello,

I have some questions regarding test recording.

First of all, I am interested to know if it is possible to give different input parameters for a recorded test. For example, I have a test which adds/deletes/updates information in a grid. I want to know if it is possible to give a list of parameters, in an excel or text file, and to execute the test for each parameter or group of parameters in the file. Or, another scenario, to gine parameters in an excel/text file and have several tests execute with parameters from the files. For example, first test executes with first parameters in the list, second with the enxt parameters and so on.

Secondly, does Test Studio have an out of the box solution for checking information in the database? For example, if I have some operations on a grid, and then I add an assertion which checks that a certain element was inserted, I want to also check if it was inserted in the database or not. I know about the possibility to add a coded step, but I was wondering if there might be any other way.

Thank you,
Corina